Hi, I did a run on the 25th that I didn't get to tag until the 28th and now it seems that my run description won't synch to this site. I can read it in the raw XML data, and I have tried refreshing my runs, but the run description still doesn't show. How can I fix this?

I have another duplicate run from 12/24.

Can someone please delete duplicate on 14th Dec 2011 ... slowgeek.com/r1170636208

Many Thanks

Tony

I have a double session in my slowgeek page on Aug 26, 2011(http://slowgeek.com/pr/282582395). I checked on nikerunning site but they refer to the same and unique run. Can any admin cancel one of them ? Thanks

I have a double session in my slowgeek page on Aug 26, 2011(http://slowgeek.com/pr/282582395). I checked on nikerunning site but they refer to the same and unique run. Can any admin cancel one of them ? Thanks

I have a double session in my slowgeek page on Aug 26, 2011(http://slowgeek.com/pr/282582395). I checked on nikerunning site but they refer to the same and unique run. Can any admin cancel one of them ? Thanks

I have a double session in my slowgeek page on Aug 26, 2011(http://slowgeek.com/pr/282582395). I checked on nikerunning site but they refer to the same and unique run. Can any admin cancel one of them ? Thanks

The only shoe tracker I use from some years is the slowgeek one.
Is it possible to be more precise for the 1st run ?
Here is my situation : I was running 20 km on Aug 10th at 10:35 and also 20 km on Aug 11th at 08:42. I wore my new shoes on this last session. But if I select my 1st run as Aug 11th, this last run isn't included. If I select it as Aug 10th, the shoe tracker estimates 20km more than in reality.
Thanks rlerdorf or other admins for considering this

I've noticed several duplicate runs showing up in Slowgeek, but not on the Nike site. The data look identical when I view on this site.

Some of the problem dates:

02 Nov 2010
30 Oct 2010
28 Oct 2010
27 Oct 2010
26 Oct 2010
25 Oct 2010
19 Oct 2010
18 Oct 2010
14 Oct 2010
12 Oct 2010
30 Sep 2010
29 Sep 2010
23 Sep 2010
22 Sep 2010
19 Sep 2010
15 Sep 2010
06 Sep 2010
29 Aug 2010

I think these may have started with iOS 4.1 with the abiltiy to upload directly from the device.

Bottom line is my numbers for September and October are way off on here, and November's already had a miss.

Any clue as to why this happens?

Not quite sure what's happening but my last run keeps being tweeted every few hours. When I delete it from my tweet feed slowgeek posts it again within minutes.

Any ideas?

Thanks,

Steve
1283114245

I was able to easily export the summary level .csv data into Excel, but when I attempt to bring in the detailed .xml data (with all the split info, etc) into Excel I get a message that says "the specified xml source does not refer to a schema. Excel will create a schema based on the XML source data". This creates an .xml source tree on the right side of the Excel workbook with titles that look like what I am looking for, but it doesn't allow me to map any of those elements into the worksheet (when I try to drag and drop them, they don't appear on the worksheet).. can you walk me from the point where it brings up the .xml data in my browser to how I get it into Excel. I am a proficient Excel user, so I should be able to figure this out, but can't get it to work for some reason..

Thanks!

Kevin

Hi there.

I even tried firefox but I can't seem to get my challenges to upload. I can get the file from nike+ and save it on my desktop in XML, but when I browse to it and say upload, there is still nothing. I can see my challenges on the xml file so I know they are there. I must be doing something wrong when I try to upload it.

Any ideas?

Thanks!

I have no expertise with dbases and sqlite but i guess it's possible to modify the iphone's nike+ GPS database (ZWORKOUT in merged_model.sqlite, located in the Documents dir within the nike+ GPS folder) to add some runs that were not recorder by the app and then sync them with the nike+ site...

Has anyone already understood how to convert the data to insert in:
ZDATE?
ZAVERAGESPEED?

and what are:
ZRECORDINGID?
Z_ENT?
Z_OPT?
ZSERVICEID?
ZATTABOYTYPE?

Also, if I add the missing run in this table will it sync with the site?

thanx

ps. thank you so much for this wonderful site!!!

rlerdorf,
Looking at this run here:
http://slowgeek.com/ru/Building429/1369813085
the run line extends past where the graph should end. Thanks,

-Building429

I set up my profile years ago, and can't remember how I added my location! I've sinced moved cities and would like to update this information so that nearby runners and weather information is correct. Can anyone let me know where to do this on the nikeplus or slowgeek websites?

Hmmmm, seems there is something strange in my last run Graph:

http://img.slowgeek.com/?size=1&n=0&lw=1&unit=km&id=1907965009&mtime=1287526928

The final distance and time are Ok, even pauses are in the right time. but something happened with the raw pace data...
I remember while I was running my 3rd Gen nanoIpod got Mute suddenly, but looking at the Ipod screen Nike+ app seemed to be working right.

May be it is time to my old charming nano to be retired......

This is the third time in the past few weeks that I haven't had a graph displayed. I get the error Not enough points to create graph. I tried re-uploading the run but the same thing happens. The distance and splits are accurate but I'm not sure where the run data is going. Is there anything else I can do to get a graph?

run#2042354575

I added a local long-time runner as a friend but I don't actually know her and don't want to look like a stalker so I was thinking about undoing it. I can't seem to find a way though. Is there a way to PM someone or undo a friending?

When looking at a run page the graph is laid out beyound the page boundaries and the left side of the graph gets cut off. You can't scroll browser window to see the left side of graph.

Verified on Safari 5.0 (7533.16) and Chrome 5.0.375.55 on Windows and Safari on iPad. IE 8 on Windows looks ok.

(Edit: uploading a screenshot failed, I'll see if I can do it later from a different computer.)

Hi, I need to track a new pair of shoes, but I am not able to re-set the shoe tracker. How do I do this?

Thanks!

Nichole

is there any way to analyze Nike+ sensor data to determine how long the ipod was paused before resuming the workout? Normally, I just pause the unit when at a red light & dont really care about the 40 or so seconds that have elapsed but yesterday I paused at a water fountain & then didnt resume until I took another water break after another 3 or so miles. My total mileage was listed at 7.7 but was trying to figure out my total mileage by dividing my pace by the mysterious elapsed time of the "pause".

Any help would be greatly appreciated.

For some reason my Nike+ iPod Nano will sometimes end a workout even though I still have miles to go. I reprogram the distance for what I calculate is remaining and start a new workout. I wish I could just go into history and start a workout from where I stopped. Anyway, two questions. 1) Is it a faulty sensor? It always happens when I stop for water, ironically. 2) Can I combine the two workouts into one on Slowgeek using my Mac? (I don't think it can be done in iTunes- I've tried searching all Apple forums).

Since mid-july my local weather station (Braunschweig, Germany, EDVE) shows no data in wunderground and in slowgeek too. Seems that the station is broke. I tried changing my station to EDDV (Hannover) in my personal profile and after a refresh, weather data was available for my july runs. The location shown for my runs with weather station EDDV is still Braunschweig (which is ok since I ran there) except for my latest run, where it shows Hannover (location of weather station EDDV). Where does slowgeek take the location info from? Is it the location information given in my personal profile or the location of the weather station? Can I change this information somehow? I hope that my local station will be ok soon so I can switch back to EDVE.

Sorry for ask this because I m sure everybody Know that
On my profile, no weather appear. The station is choose but nothing
Is There an help page for those who don't understand anything like me?
Thank you

Hello,

I have no graph for my previous run today.
I have found this message :

Fatal error: Uncaught exception 'ImagickException' with message 'NoDecodeDelegateForThisImageFormat `/tmp/magick-XX0EL4rk' @ error/constitute.c/ReadImage/533' in /var/www/slowgeek.com/chart.php:712 Stack trace: #0 /var/www/slowgeek.com/chart.php(712): Imagick->__construct('images/lweather...') #1 {main} thrown in /var/www/slowgeek.com/chart.php on line 712

Best regards,

Paul

Hi, I've been tracking my friend's runs and I've noticed that his last two runs have the splits in the wrong positions (ie, not at a mile/km marker)! It happens on both miles and km. Is it because of the XML not having recorded the splits at the exact km/mile markers? They numbers look a bit off:

http://slowgeek.com/ru/OliPetry/877891118
http://slowgeek.com/ru/OliPetry/475199001

Thanks!
Pedro

Hi! I have to say I'm always so excited to exit from Nike+ after uploading my runs to come over here and see the run graph you make. It isn't perfect, but it is always MUCH closer to accurate. I was wondering, would you be interested in having data on what I actually ran to see if there were any ways to tweek the code you use to read the raw data to make it even more accurate? It may not be possible but I thought I'd offer just in case.

Also, I don't suppose you get to be on the inside loop to hear when the next update to the sportsband code is planned and what fixes they are rolling out with that? (And mostly if/when they hope to roll out the 'snap to grid' fix?) Of course, they won't ever answer that question on their own forums when I ask.

Is there a threshold for miles to be added for the month? I've been trying to calibrate. I was successful with the walk - but not the run. I will try again later. Yur site says I have 2.29 miles for the month. If you add up the 4 I have for the month - the total is 3.28. Will it be corrected?

Thanks

Hi,

Sorry if this has been addressed before, I couldn't find any references to it: Is it possible to change the twitter handle used to post my latest run? I can't even find the screen where I first set it. I changed twitter accounts and no longer use the old one, so now when I click on the twitter icon I only get a screen with what seems to be a PHP stacktrace because the authorization is wrong.

Thanks in advance,
Campoy

My last run looks too flat on your graph. I am using the Sportband. I understand that the issues with the Sportband software. Is this what I'm seeing. I ran a known distance which was pretty close to what was shown on the band. Am I possibly having sensor problems?

I heard a rumor that Nike may be introducing a link to Droid Phones. Have you heard anything about this?

BTW Your site is great. Thanks for everything.